MGP WRM2 Specifikace stáhnout pdf (Strana 34)

15-00044

Revision 5

April 2008

The publication, translation or reproduction, either party or wholly, of this document are not allowed without our written consent. 34

Meter type year serial # (DRM-1)

Note: Correlation between the factory serial number and the Telemetry ID #

Factory S.N. ID #

AMP- 50 09 02 801 9 22 801

AMP-100 50 02 001 9 32 001

AMP-200 77 02 501 9 42 501

DRM-1 11004 - 0008 9 54 008

Example:

Note: For the DRM-1D/2D, the Automatic Background Subtraction is activated by

changing the ‘Background’ number to ‘9999’ and press Send. The DRM-1/2D will

count the background for 60 seconds and then set the current background

internally. The displayed value on the optional display or software will show the

net dose rate.

Automatic Background Options:

1. When the Backup battery is disconnected (dipswitch 7& 8 in off ) , connect the external power supply, the

meter will turn ON and enter to calculate the background during the 60 second count, automatically, after

60 second this value will be kept in memory

2. Connect the meter to PC and run the RMV software, in the AMP setup function type ‘9999’ for automatic

calculation, the meter will enter to calculate the background during 60 second, after 60 second this value

will be kept in memory.

Note: If the threshold alarm setting is lower then the background when performing the

utomatic background subtraction the alarm will be activated until the background

9 54 008

Input ‘9999’ to activate the

Automatic Background

mode for the DRM-1D

(Does not apply to

DRM-1/2 model)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Žádné komentáře

MGP WRM2 Specifikace Strana 34